30 Watt LED Strip Light Power Supply Variable Stable Output Voltage 50 - 60Hz
Installation and working environments:
• Make sure work in proper environments are stated in this Guide.
• Do not overload.
• Avoid free of load while a power supply is powered on, keep proper loading
• Always keep good ventilation
• Do not mount on wood or flammable surface
• Keep away from inflammable or explosive environments.
Description:
1. Protections :Short circuit/Overload/Over temperature
2. Cooling by free air convection
3. IP67 design for indoor or outdoor installations
4. 100% full load burn-in test
5. Suitable for LED lighting
6. Products through CE& ROHS certification
7. Two years warranty
Warranty policy
1:Warranty: 2 years.
2:100% of all delivered products will be tested before shipping by our QC staff
3:During the warranty period, we will immediately supply replacement for free.then send it to you with your next order together.
4:After warranty period, we will guide you to repair and provide you spare parts.
Competitive Advantage:
• IP67 protection grade
• 100% load test, built-in EMI filters
• Full range of input voltage
• output voltage accurate and stable
• Output over-voltage, over-current and short-circuit protection
• Output low ripple and noise
• Two year warranty
• Average working no trouble ＞50, 000 hours
Specification:
|
MODEL
|
|
12V30W
|
24V30W
|
|
OUTPUT
|
DC VOLTAGE
|
12V
|
24V
|
|
|
RATED CURRENT
|
2.5A
|
1.25A
|
|
|
CURRENT RANGE
|
0~2.5A
|
0~1.25A
|
|
|
RATED POWER
|
30W
|
30W
|
|
|
RIPPLE & NOISE(max.) NOTE 2
|
100mV
|
100mV
|
|
|
VOLTAGE TOLERANCE NOTE 3
|
±2%
|
±2%
|
|
INPUT
|
VOLTAGE RANGE
|
190~250V
|
|
|
FREQUENCY RANGE
|
50~60Hz
|
|
|
POWER FACTOR (Typ.)
|
PF>0.5/220VAC
|
|
|
EFFICIENCY (Typ.)
|
81%
|
85%
|
|
|
AC CURRENT (Typ.)
|
0.28A/220CAC
|
|
PROTECTION
|
Short circuit
|
Protection type : recovers automatically atter fault
condition is removed
|
|
|
Overload
|
overload protected @ 110-140% above peak rating
|
|
|
Over temperature
|
Protection type: Shut down o/p voltage, re-power on
to recover
|
|
ENVIRONMENT
|
WORKING TEMP.
|
-30 ~ +50 ℃( Refer to output load derating curve)
|
|
|
WORKING HUMIDITY
|
20 ~ 99% RH non - condensing (Waterproof)
|
|
|
STORAGE TEMP., HUMIDITY
|
-40 ~ +80 ℃, 10 ~ 99% RH
|
|
SAFETY & EMC
|
SAFETY STANDARDS
|
CE Mark ( LVD), IP67
|
|
|
WITHSTAND VOLTAGE
|
I /P- OP : 1.5KVAC I /P - GND : 1.5KVAC
|
|
|
EMC Test Standards
|
EN55015:2006;EN61547:1995+A1:2000;
EN61000-3-2:2006;
EN610000-3-3:1995+A2:2005;1955+A2;
EN61347-1:2001:EN61347-2-13:2006
|
|
NOTE
|
1.All parameters NOT specially mentioned are measured at 220VAC input, rated load
and 25°C of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire
terminated with a 0.1 μf &10 μf parallel capacitor.
3.Tolerance:inclues set up tolerance line regulation and load regulation.
|
Slivery white DC12V/24V Constant Voltage LED Driver 30W aluminum for led strip
Your message must be between 20-3,000 characters!
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews