1. We have 5 Years Export Experience
2. 100% full load burn-in test
3. Approved CE, ISO 9001 certificates
4. 2 years warranty
SWITCH POWER SUPPLY SINGLE TYPE S SERIES S-25W
1. Features
1. Low price and high reliable.
2. 105 `C output capacitor
3. AC input power suitable for the world
4. High efficiency and how operation temperature.
5. Soft-start current can reduce the AC input impact effecticly.
6. With short-circuit and overload protection.
7. Compact size, light weight.
8. 100% full-load buming test.
9. installed with EMI filter, minmum wave.
10. S-25-24 Single ATX Mode Switch DC Regulated Power Supply 25W
2.Specification
|
Model Specification |
S-25-5V |
S-25-12V |
S-25-15V |
S-25-24V |
|
DC Output Voltage |
5V |
12V |
15V |
24V |
|
Iutput Voltage Error |
± 2% |
± 1% |
± 1% |
± 1% |
|
Rated Output Current |
5A |
2.1A |
1.7A |
1.1A |
|
Output Current Range |
0-5A |
0-2.1A |
0-1.7A |
0-1.1A |
|
Tripple and Noise |
75mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
|
Iniet Stability |
± 0.5% |
± 0.5% |
± 0.5% |
± 0.5% |
|
Tolerance Voltage |
± 1% |
± 0.5% |
± 0.5% |
± 0.5% |
|
DC Output Power |
25W |
25.5W |
25.5W |
26.4W |
|
Efficiency |
72% |
76% |
77% |
80% |
|
Adjustable Range for DC Voltage |
`+10, -5% |
± 10% |
± 10% |
± 10% |
|
AC Input Voltage Range |
85~132VAC/170~264VAC selected by switch 47~63Hz; 240~370VDC |
|
Input Current |
0.7A/115V 0.3A/230V |
|
AC Inrush Current |
Cold-Start Current: 15A/115V, 30A/230V |
|
Leakage Current |
<;;0.75mA/240VAC |
|
Overload Protection |
105%~150% Type: Foldback Current Limiting, Reset: Auto Recovery |
|
Over Voltage Protection |
………… |
|
High Temperature Protection |
………… |
|
Temperature Coefficient |
± 0.03% /°C (0~50°C) |
|
Start, Rise, Hold time |
800ms, 50ms, 30ms,/ 115VAC, 300ms, 50ms, 80ms, /230VAC |
|
Vibration |
10~500Hz, 2G 10min,/1cycle, a total of 60 minutes, Each axes |
|
Withstand Voltage |
Between Input and Output: 1.5KVAC, Input and Shell: 1.5KVAC, Output and Shell: 0.5KVAC |
|
Isolation Resistance |
Input and Output Intermal: Input and Enclosute, Output and Enclosure: 500VDC/100M Ohms |
|
Working Temperature and Humidity |
`-10°C~+60°C (Refer to Output Derating Cutve), 20%~90%RH |
|
Storage Temperature and Humidity |
`20°C~+85°C, 10%~95%RH |
|
Overall Dimension |
99*97*35mm |
|
Weight |
0.3kgs |
|
Safety Standards |
Meet UL 1012 requirement (Not apply for the mark) |
|
EMC Standards |
Meet FCC Part 15J Conduction class B |
3. Mechanical Dimension:
4. Certificates:
5. Please Note:
1. The testing condition for the parameter above is: 230VAC input, rated load, 25°C 70%Rh, Humidity.
2. Error, include the setting error, line stability and load stability.
3. Wave test: adopting "A12" double wire for 20MHZ, and 0.1uF&uF capacitor short-circuit for interrupting.
4. Inlet Voltage Stability test: when is over load, the lowest voltage of inler is representative to the highest voltage.
5. Load stability test: the load is from 0% to 100%, others 60%.
6. C6 must be knocked down.
Your message must be between 20-3,000 characters!
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews