AC / DC Constant Voltage LED Driver 24VDC Aluminum IP67 AC 170V - 250V for LED lighting
Description:
1. Protections :Short circuit/Overload/Over temperature
2. Cooling by free air convection
3. IP67 design for indoor or outdoor installations
4. 100% full load burn-in test
5. Suitable for LED lighting
6. Products through CE& ROHS certification
7. Two years warranty
Warranty policy
1:Warranty: 2 years.
2:100% of all delivered products will be tested before shipping by our QC staff
3:During the warranty period, we will immediately supply replacement for free.
then send it to you with your next order together.
4:After warranty period, we will guide you to repair and provide you spare parts.
Installation and working environments:
• Make sure work in proper environments are stated in this Guide.
• Do not overload.
• Avoid free of load while a power supply is powered on, keep proper loading
• Always keep good ventilation
• Do not mount on wood or flammable surface
• Keep away from inflammable or explosive environments
Features:
· Protections: Short circuit / Overload / Over Voltage / Over Temperature
· IP protection standard: IP67
· Efficiency: 85%
· 100% full load burn-in test
· Storage temperature: -40-80°C
· Operating temperature: -25-45°C
Our Servise
1. Our trade manager is online 24hours .and we will reply your inquiry within 5 hours.
2. Our warranty 3 years
3. If product quality problems occur within the warranty period, free replacement of the same type of product or repaired bad product.
4.100% Burn in test for 12 hours before shipping.
Specification:
|
MODEL
|
|
12V250W
|
24V250W
|
|
OUTPUT
|
DC VOLTAGE
|
12V
|
24V
|
|
|
RATED CURRENT
|
21A
|
10.5A
|
|
|
CURRENT RANGE
|
0~21A
|
0~10.5A
|
|
|
RATED POWER
|
250W
|
250W
|
|
|
RIPPLE & NOISE(max.) NOTE 2
|
300mV
|
300mV
|
|
|
VOLTAGE TOLERANCE NOTE 3
|
±3%
|
±4%
|
|
INPUT
|
VOLTAGE RANGE
|
180~250V
|
|
|
FREQUENCY RANGE
|
50~60Hz
|
|
|
POWER FACTOR (Typ.)
|
PF>0.5/220VAC
|
|
|
EFFICIENCY (Typ.)
|
86%
|
88%
|
|
|
AC CURRENT (Typ.)
|
2.4A/220CAC
|
|
PROTECTION
|
Short circuit
|
Protection type : recovers automatically atter fault
condition is removed
|
|
|
Overload
|
overload protected @ 110-140% above peak rating
|
|
|
Over temperature
|
Protection type: Shut down o/p voltage, re-power on
to recover
|
|
ENVIRONMENT
|
WORKING TEMP.
|
-30 ~ +50 ℃( Refer to output load derating curve)
|
|
|
WORKING HUMIDITY
|
20 ~ 99% RH non - condensing (Waterproof)
|
|
|
STORAGE TEMP., HUMIDITY
|
-40 ~ +80 ℃, 10 ~ 99% RH
|
|
SAFETY & EMC
|
SAFETY STANDARDS
|
CE Mark ( LVD), IP67
|
|
|
WITHSTAND VOLTAGE
|
I /P- OP : 1.5KVAC I /P - GND : 1.5KVAC
|
|
|
EMC Test Standards
|
EN55015:2006;EN61547:1995+A1:2000;
EN61000-3-2:2006;
EN610000-3-3:1995+A2:2005;1955+A2;
EN61347-1:2001:EN61347-2-13:2006
|
|
NOTE
|
1.All parameters NOT specially mentioned are measured at 220VAC input, rated load
and 25°C of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire
terminated with a 0.1 μf &10 μf parallel capacitor.
3.Tolerance:inclues set up tolerance line regulation and load regulation.
|
AC/DC Aluminum 24VDC Constant Voltage LED Driver 250W AC170V-250V waterproof IP67
Your message must be between 20-3,000 characters!
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews