Thinnest LED power supply driver ROHS AC 170V - 250V for led lighting Low output ripple moises
Features
· Small size,High efficiency,High reliability,Long lifetime;
· IP67 rating;
· Working temperature -25~+60°C
· Protection:Overload,Short-circuit pratection,Over-temperature;
· Typical efficiency:88.5%
· Low standby power,min to 0.3W;
· Start delay design,which can reduce the starting current when multiple simulatance start;
· CE,IP67 certifide,ROHS compliant;
· Low output ripple moises.
Description:
1. Protections :Short circuit/Overload/Over temperature
2. Cooling by free air convection
3. IP67 design for indoor or outdoor installations
4. 100% full load burn-in test
5. Suitable for LED lighting
6. Products through CE& ROHS certification
7. Two years warranty
Application:
it can be used for LED strip.LED guardral tubeLED modules,LED point lighting source,LED luminous
characters,LED lighting,LED display,light Fixtur and so on
Competitive Advantage:
• IP67 protection grade
• 100% load test, built-in EMI filters
• Full range of input voltage
• output voltage accurate and stable
• Output over-voltage, over-current and short-circuit protection
• Output low ripple and noise
• Two year warranty
• Average working no trouble ＞50, 000 hours
Advantages
* Applicable AC input power around the world
* Protection for short circuit/over load/over voltage/over temp.
* Built-in EMI filter with tiny ripple
* 100% full load burn-in testing
* small volume high efficiency
* Conform to safety and EMC standards
* Conform to EMC standards
Specification:
|
MODEL
|
|
12V300W
|
24V300W
|
|
OUTPUT
|
DC VOLTAGE
|
12V
|
24V
|
|
|
RATED CURRENT
|
25A
|
12.5A
|
|
|
CURRENT RANGE
|
0~25A
|
0~12.5A
|
|
|
RATED POWER
|
300W
|
300W
|
|
|
RIPPLE & NOISE(max.) NOTE 2
|
350mV
|
400mV
|
|
|
VOLTAGE TOLERANCE NOTE 3
|
±2%
|
±2%
|
|
INPUT
|
VOLTAGE RANGE
|
170~264V
|
|
|
FREQUENCY RANGE
|
50~60Hz
|
|
|
POWER FACTOR (Typ.)
|
PF>0.5/220VAC
|
|
|
EFFICIENCY (Typ.)
|
86%
|
86%
|
|
|
AC CURRENT (Typ.)
|
1.6A/220CAC
|
|
PROTECTION
|
Short circuit
|
Protection type : recovers automatically atter fault
condition is removed
|
|
|
Overload
|
overload protected @ 110-140% above peak rating
|
|
|
Over temperature
|
Protection type: Shut down o/p voltage, re-power on
to recover
|
|
ENVIRONMENT
|
WORKING TEMP.
|
-30 ~ +50 ℃( Refer to output load derating curve)
|
|
|
WORKING HUMIDITY
|
20 ~ 99% RH non - condensing (Waterproof)
|
|
|
STORAGE TEMP., HUMIDITY
|
-40 ~ +80 ℃, 10 ~ 99% RH
|
|
SAFETY & EMC
|
SAFETY STANDARDS
|
CE Mark ( LVD), IP67
|
|
|
WITHSTAND VOLTAGE
|
I /P- OP : 1.5KVAC I /P - GND : 1.5KVAC
|
|
|
EMC Test Standards
|
EN55015:2006;EN61547:1995+A1:2000;
EN61000-3-2:2006;
EN610000-3-3:1995+A2:2005;1955+A2;
EN61347-1:2001:EN61347-2-13:2006
|
|
NOTE
|
1.All parameters NOT specially mentioned are measured at 220VAC input, rated load
and 25°C of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire
terminated with a 0.1 μf &10 μf parallel capacitor.
3.Tolerance:inclues set up tolerance line regulation and load regulation.
|
Best seller DC12V/24V 300W Slim LED Driver AC90V-130V/170V-250V for led lighting
Your message must be between 20-3,000 characters!
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews