 |
| Place of Origin: | Guangdong, China (Mainland) |
| Brand Name: | e.mini |
| Certification: | CE, RoHS, FCC, PSE |
| Model Number: | LR-FLEX300W |
| is_customized: | yes |
|---|---|
| Output Power: | 200w max |
| Size: | 188mm*86mm*51mm |
| Input Frequency Range: | 47Hz - 63 Hz |
| Input Current: | Max. 2.5A / 220Vac, Max.5A / 110Vac |
| Input Inrush Current: | 60A / 220V at 25 degree cold start |
| Input Efficiency: | Min. 65% at full load 220Vac 50Hz |
| Type: | AC DC Adjustable Switching Power Supply |
| Service: | OEM, ODM, After-sale service |
| Output Type: | quintuple |
| Input Voltage: | 110V, 220V |
| Output Current: | 5v 10a, 12v 9a, 3.3v 8a, 5v 1.5a |
| Minimum Order Quantity: | 20 Pieces |
|---|---|
| Packaging Details: | normal paper box |
| Delivery Time: | Within 2-7 working days after getting deposit |
| Payment Terms: | LC, T/T, Western Union, Aliexpress, Credit card |
| Supply Ability: | 25000 Pieces per Month |
| High Light: | switched mode power supply,switch mode power supply |
||
|---|---|---|---|
AC DC Switching Mode Power Supply , 12V 200W 60A Adjustable Switching Power Supply
Competitive Advantages:
1. Multi-purpose products
2. Five protection: Overcurrent Protection, overvoltage protection, over-temperature protection, overpower protection, short-circuit protection
3. 250W max power, 220W rated output power
4. Professional Mini ITX Case Manufacturer
5. OEM, ODM Services
6. AC DC Adjustable Switching Power Supply
7. Input Current : Max. 2.5A / 220Vac, Max.5A / 110Vac
8. Input Inrush Current : 60A / 220V at 25 degree cold start
9. CE, FCC, PSE, ROHS Certification
Why Realan:
We are a very professional manufacturer for mini computer cases and power supplies, with the rich experience for over 10 years of developing and producing pc cases. Determination achieves quality, Realan is always keeping the production philosophy that doing by heart, win to win, providing the higher products value cooperation. And our products have been exported to East Asia, Southeast Asia, Middle East, North America, South America, Europe, Africa, Australia and other countries.
Please don't hesitate to contact us if you have any questions or concerns before or after your purchase. We are committed to your 100% satisfaction.
Detailed Specification:
1.0 INPUT
1.1 VOLTAGE
| Min. | Normal | Max. | Unit |
| 180 | 220 | 260 | Vac |
| 90 | 110 | 130 | Vac |
1.2 FREQUENCY
47-63 Hz
1.3 CURRENT
| Max. 2.5A /220Vac | Max.5A /110Vac |
1.4 INRUSH CURRENT
60A/220V at 25°CCOLD START
1.5 EFFICIENCY
MIN65%AT FULL LOAD 220Vac 50Hz
2.0 OUTPUT
2.1 OUTPUT POWER
200W (MAX).
2.2 VOLTAGE
| +5V | +12V | -12V | +3.3V | +5Vsb | |
| MAX LOAD | 10A | 10A | 0.3A | 8A | 2A |
| MIN LOAD | 1.5A | 0.3A | 0A | 0A | 0A |
| Regulation | ± 5% | ± 5% | ± 10% | ± 5% | ± 5% |
| Ripple | 50mV | 120mV | 300mV | 50mV | 50mV |
| Noise | 100mV | 240mV | 360mV | 100mV | 100mV |
NOTE:
1,The continuous max. DC output power shall not exceed 200W.And+5V,+3.3V total output power must not exceed 100W.
2,A 0.1uF ceramic disk capacitor & 10uF electrolytic (low ESR) capacitor should be putacross the output terminals during ripple & noise measure. The oscillo-scope bandwidth set at 20MHz withco-axial probe.
3,Regulation load must within 30% to 70% of maximum load.
4,AMBIENT TEMPERATURE 25°C.
3.0 PROTECTION
3.1 OVER LOAD PROTECTION
3.1.1 120-160% of maximum power.
3.2 SHORT CIRCUIT PROTECTION
All output to ground.
NOTE :After protection active all output will shut down .After shut down the power supply shall
return to normal operation.only after the fault has been removed and the remote signal
reset for a minimum 1 second (or the AC remove for 10 second).
4.0 TIMING SEQUENCE
4.1 TURN ON TIME
900mS MAX
4.2 P.G Delay time
100~500mS
4.3 P.F time
1mS MIN.
4.4 Hold up time.
15mS MIN.
5.0 TEMPERATURE CHARACTORISTICS
5.1 OPERATION AMBIENT :
+10 to +40°C.
20~85%
5.2 NON-OPERATION AMBIENT:
-40°Cto +70°C.
10~90%
6.0 SAFETY REQUIREMENT
6.1 HI-POT TEST
Vac =1500 Vac Current limit 10mA
6.2 GROUNDING TEST
| R<100mOhm | Condition | I=24Aac |
6.3 Isolation test
| R>2MOhm | Condition | 400VDC |
7.0 ELECTROMAGNETIC COMPATIBILITY (Optional )
7.1 Meet with the EMI standards.
8.0 Burn-in
Full load,2 Hour .
Contact Person: Mr. li
Tel: 56966398
Fax: 86-20-5696-5696
Address: 4th Floor, No. 174, Binjiang Xi Road, Haizhu District, shenzhen,Guangdong,China(Mainland)
Factory Address:4th Floor, No. 174, Binjiang Xi Road, Haizhu District, shenzhen,Guangdong,China(Mainland)
