| Place of Origin: | China |
| Brand Name: | Enargy |
| Model Number: | CMD110-24S230 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Price: | Negotiation |
| Delivery Time: | 1-8 Weeks |
| Payment Terms: | Negotiation |
| Supply Ability: | 15000Pcs/week |
| Highlight: | telecom power supplies |
||
|---|---|---|---|
Input 20-30V Telecom Power Supply 110W Output 230V/0.5A CMD110-24S230
Key Features
Output power: 110W
Wide input range: 20-30VDC
Isolation Voltage :1,500V
Output short circuit protection
Intelligent charging management
IP55 protection grade
GB/T11287-2000 class I vibration grade
Product Overview
This DC-DC capacitor charging converter is designed for DTU/FTU and permanent magnetic actuator applications. It can widely be used in the area of permanent magnetic actuator of distribution network automation switch, power permanent magnet switch, super energy storage capacitor, other energy storage capacitor for uninterruptable applications.
Electric Characteristics
·Electrical characteristics apply over the full operating range of input voltage, output load and base plate temperature, unless otherwise specified. All temperatures refer to the operating temperature at the center of the base plate.
Absolute maximum ratings
|
Parameter |
Min |
Typ |
Max |
Units |
Notes |
|
Isolation voltage |
|
|
1500 |
Vdc |
Input to output |
|
Operating Temperature |
-40 |
|
70 |
℃ |
|
|
Storage Temperature |
-40 |
|
105 |
℃ |
|
Input Characteristics
|
Parameter |
Min |
Typ |
Max |
Units |
Notes |
|
Input voltage range |
20 |
24 |
30 |
Vdc |
Input polarity can’t be reversed |
|
Dissipation |
|
|
3 |
W |
Input voltage:24V,no load |
Output Characteristics
|
Parameter |
Min |
Typ |
Max |
Units |
Notes |
|
Output Voltage(charging) |
0 |
|
230 |
Vdc |
Adjustable from 0 to maximum charging voltage |
|
Maximum Output Charging Voltage |
215 |
|
230 |
Vdc |
Adjustable by voltage adjusting knob |
|
Output Charging Current |
0.4 |
0.5 |
0.6 |
A |
Constant current |
|
Temperature Regulation |
|
|
±0.05 |
% / °C |
Over operating temperature range |
|
Ripple (RMS) |
|
|
2000 |
mV |
Nominal input; full load; 20 MHz bandwidth; |
|
Noise(Peak-to-Peak) |
|
|
2000 |
mV |
Isolation Characteristics
|
Parameter |
Min |
Typ |
Max |
Units |
Notes |
|
Isolation Voltage |
2,500 |
|
|
Vdc |
Input to Output |
|
2500 |
|
|
Vdc |
Input to Base |
|
|
2500 |
|
|
Vdc |
Output to Base |
|
|
Isolation Resistance |
50 |
|
|
MΩ |
At 500VDC to test it when atmospheric pressure and R.H. is 90% |
General Characteristics
|
Parameter |
Min |
Typ |
Max |
Units |
Notes |
|
Weight |
8.75(250) |
9.1(260) |
9. 45 (270) |
Oz (g) |
metal enclosure |
|
MTBF ( calculated ) |
80 |
|
|
KHrs |
TR-NWT-000332; 80% load,300LFM, 40℃ Ta |
Environmental Characteristics
|
Parameter |
Min |
Typ |
Max |
Units |
Notes |
|
Operating Temperature |
-40 |
|
+70 |
℃ |
Ambient |
|
Storage Temperature |
-40 |
|
+105 |
℃ |
Ambient |
|
Humidity |
20 |
|
95 |
%R.H. |
Relative Humidity, Non - Condensing |
Standards Compliance
|
Parameter |
Notes |
|
GB/T11287 |
|
|
GB4208 |
|
|
Q/GDW514 |
|
|
Needle Flame Test (IEC 695-2-2) |
test on entire assembly; board & plastic components UL94V-0 compliant |
|
IEC 61000-4-2 |
|
Qualification Specification
|
Parameter |
Notes |
|
Vibration |
10-55Hz sweep, 1 min./sweep, 120 sweeps for 3 axis |
|
Mechanical Shock |
100g min, 2 drops in x and y axis, 1 drop in z axis |
|
Cold(in operation) |
IEC60068-2-1 Ad |
|
Damp heat |
IEC60068-2-67 Cy |
|
Temperature Cycling |
-40°C to 100°C, ramp 15°C/min., 500 cycles |
|
Power/Thermal Cycling |
Vin = min to max, full load, 100 cycles |
|
Design Marginality |
Tmin-10°C to Tmax+10°C, 5°C steps, Vin = min to max, 0-105% load |
|
Life Test |
95% rated Vin and load, units at derating point, 1000 hours |
|
Solderability |
IEC60068-2-20 |
Mechanical Outline
![]()
Pin Designations
![]()
|
Pin No. |
Name |
Function |
|
1 |
Vin+ |
Positive input voltage |
|
2 |
Vin- |
Negative input voltage |
|
3 |
FG |
Ground |
|
4 |
NC |
unnecessary |
|
5 |
JA |
switch |
|
6 |
JB |
switch |
|
7 |
C+ |
Positive capacitor (Positive output voltage) |
|
8 |
C |
Negative capacitor (Negative output voltage) |
Contact Person: Mr. li
Tel: 56966398
Fax: 86-20-5696-5696
Address: 4th Floor, No. 174, Binjiang Xi Road, Haizhu District, shenzhen,Guangdong,China(Mainland)
Factory Address:4th Floor, No. 174, Binjiang Xi Road, Haizhu District, shenzhen,Guangdong,China(Mainland)
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews