Switch Power Supply

1. We have 5 Years Export Experience
2. 100% full load burn-in test
3. Approved CE, ISO 9001 certificates
4. 2 years warranty

SWITCH POWER SUPPLY SINGLE TYPE S SERIES S-25W

 

1. Features

 

1. Low price and high reliable.

2. 105 `C output capacitor

3. AC input power suitable for the world

4. High efficiency and how operation temperature.

5. Soft-start current can reduce the AC input impact effecticly.

6. With short-circuit and overload protection.

7. Compact size, light weight.

8. 100% full-load buming test.

9. installed with EMI filter, minmum wave.

10. S-25-24 Single Output Mode Switch DC Regulated 25W 24V Power Supply S-25-24

 

2.Specification

 

Model Specification	S-25-5V	S-25-12V	S-25-15V	S-25-24V
DC Output Voltage	5V	12V	15V	24V
Iutput Voltage Error	± 2%	± 1%	± 1%	± 1%
Rated Output Current	5A	2.1A	1.7A	1.1A
Output Current Range	0-5A	0-2.1A	0-1.7A	0-1.1A
Tripple and Noise	75mVp-p	100mVp-p	100mVp-p	100mVp-p
Iniet Stability	± 0.5%	± 0.5%	± 0.5%	± 0.5%
Tolerance Voltage	± 1%	± 0.5%	± 0.5%	± 0.5%
DC Output Power	25W	25.5W	25.5W	26.4W
Efficiency	72%	76%	77%	80%
Adjustable Range for DC Voltage	`+10, -5%	± 10%	± 10%	± 10%
AC Input Voltage Range	85~132VAC/170~264VAC selected by switch 47~63Hz; 240~370VDC
Input Current	0.7A/115V 0.3A/230V
AC Inrush Current	Cold-Start Current: 15A/115V, 30A/230V
Leakage Current	<;;0.75mA/240VAC
Overload Protection	105%~150% Type: Foldback Current Limiting, Reset: Auto Recovery
Over Voltage Protection	…………
High Temperature Protection	…………
Temperature Coefficient	± 0.03% /°C (0~50°C)
Start, Rise, Hold time	800ms, 50ms, 30ms,/ 115VAC, 300ms, 50ms, 80ms, /230VAC
Vibration	10~500Hz, 2G 10min,/1cycle, a total of 60 minutes, Each axes
Withstand Voltage	Between Input and Output: 1.5KVAC, Input and Shell: 1.5KVAC, Output and Shell: 0.5KVAC
Isolation Resistance	Input and Output Intermal: Input and Enclosute, Output and Enclosure: 500VDC/100M Ohms
Working Temperature and Humidity	`-10°C~+60°C (Refer to Output Derating Cutve), 20%~90%RH
Storage Temperature and Humidity	`20°C~+85°C, 10%~95%RH
Overall Dimension	99*97*35mm
Weight	0.3kgs
Safety Standards	Meet UL 1012 requirement (Not apply for the mark)
EMC Standards	Meet FCC Part 15J Conduction class B

 

3. Mechanical Dimension:

 

4. Certificates:

 

5. Please Note:

 

1. The testing condition for the parameter above is: 230VAC input, rated load, 25°C 70%Rh, Humidity.

2. Error, include the setting error, line stability and load stability.

3. Wave test: adopting "A12" double wire for 20MHZ, and 0.1uF&uF capacitor short-circuit for interrupting.

4. Inlet Voltage Stability test: when is over load, the lowest voltage of inler is representative to the highest voltage.

5. Load stability test: the load is from 0% to 100%, others 60%.

6. C6 must be knocked down.